Husqvarna TE 250-310 2012 I.E. Workshop Manual page 94

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
38
37
Workshop Manual Ed. 12-2011
GENERAL PROCEDURES
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
- Remove the guards (37) on both sides shearing the clips (38).
H02348
- Remove the engine mounting bolts (41) using a 12 mm wrench on the left-
hand side and a 10 mm wrench on the right-hand side.
41
41
H02237
- Loosen the swinging arm axle nut (42) using a 22 mm wrench; pull out the
axle (43) from the right-hand side of the engine and pull the swinging arm
rearwards to facilitate engine removal.
- Lift the engine, tilt it to the left and remove it from the motorcycle.
- Place the engine on a rotating stand to perform the procedures described in
Sections F-G-H.
42
H02238
43
E.30
H02239