Husqvarna TE 250-310 2012 I.E. Workshop Manual page 234

TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
Workshop Manual Ed. 12-2011
FRONT SUSPENSION
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
If outer tube and inner tube are still assembled together, place the fork leg upside
down and allow at least 20 minutes for oil to drain.
H06825
Remove the dust seal using a flat head screwdriver.
H06826
Remove the retaining ring using a flat head screwdriver.
H06827
Pull the inner tube until separating it from the outer tube.
Note: to facilitate removal, quickly (but carefully) pump the tubes back and forth
until separating them.
H06828
I.10