Typical Function Keys Of Powertopolite - Pentax R-422VN Instruction Manual

2.3 Typical Function keys of PowerTopoLite

Following function keys are typical of PowerTopoLite and each function key is described for
each function in this Manual.
KEY
PAGE
SELECT
ACCEPT
INPUT
BSP
SAVE
ME/SAVE
EDIT
REMOTE
OFFSET
STATION
H. ANGLE
LIST
OTHER
ZOOM ALL
ZOOM IN
ZOOM OUT
DRAW
DISP
DELETE
FIND PN
ADD
CALC
NEXT
DATA
TARGET
EDM
ALL
ORDER
Description
Views another function combination.
Selects the Character and moves to next input at PN input etc.
Enters the displayed values without new Coordinates value input etc.
Inputs your desired Horizontal angle.
Views the BSP SETUP screen to input its Coordinates.
Saves input data.
Measures and then saves input data.
Changes the Point Name or Prism Height.
Views your aiming point Coordinates.
Views the Target Coordinates adding the offset values.
Returns to the STATION POINT SETUP screen.
Returns to the STATION POINT H.ANGLE SETUP screen.
Views the POINT SELECTION FROM THE LIST screen.
Views the JOB LIST SEARCH screen.
Returns to the original size.
Magnifies the graphics size.
Reduces the graphics size.
Views the GRAPHICAL VIEW screen.
Views point or point & graphic or point & point name or all.
Views the POINT DELETION screen.
Views the PN search screen by inputting the point name.
Allows you to add more points for free stationing.
Starts the calculation of free stationing.
Views the next known point Coordinates setup screen.
Views the TARGET POINT screen.
Selects the Target type.
Selects the EDM settings.
Selects all points of the current job.
The order of selected points.
13