Station Setup [By Rectangular & Polar Coordinates] - Pentax R-422VN Instruction Manual

RO: Radial Offset (RO: On the horizontal plane. Offset P: Along the line of measurement,
thus along the slope)
Z
SP
DO: Distance Offset (Along the line of measurement, thus along the slope)
Z
SP
4.10 Station setup [By Rectangular & Polar Coordinates]
Rectangular Data and Polar Data can be stored at the same time in this function.
Press [F2] [MEAS] of the PowerTopoLite to view
the MEASURE METHOD SELECTION screen.
Select 3. RECT._POLAR COORD. and press [ENT]
to view the STATION POINT SETUP screen.
The [ ] / [ ] mark is used to scroll up / down.
Input the necessary parameters.
For more details on input procedure, refer to "4.1
Station setup [By Rectangular Coordinates] " and "4.5 Station setup [By Polar Coordinates] "
34
Offset Point : Offset P
P
RO
X.Y
Offset P
DO
P
X.Y