Corner Point Measuring - Pentax R-422VN Instruction Manual

Aim at the reference point and press [ENT] to view
the MEASURE screen.
Measuring
Aim at the Target point and press [F1] [MEAS] to
measure the distance.
Press [F3] [ME/SAVE] to measure and save the
measured data as sideshot point.
Press [F2] [SAVE] to save the measured data as sideshot point.
When no PN is input, no survey data is saved.
Press the [F4] [EDIT] to edit the PN, Point Name,
PH, Prism Height and PC, Point Code.
Press [ENT] to view each input window by pressing
the up or down arrow key, and input your desired
Point Name or Prism Height or Point Code. Press
[F5] [ACCEPT], if the current PN, PH and PC are acceptable.
Press the [ENT] to save the measured data as corner point. If [ENT] is pushed more than
twice at the one station, the last [ENT] point becomes next corner point.
NOTE: Please use [SAVE] [ME/SAVE] and [ENT]
properly by sideshot and corner point.
Press [F5] [PAGE] to view another menu.

11.2 Corner point measuring

Select 2.CORNER POINT to start measuring at
corner point.
And press [ENT] to view the STATION POINT
SETUP screen.
106