Powertopolite Operating Procedures; Starting Special Function; Camera Function; Auto Snap - Pentax Visio R-400VDN Series Quick Reference Manual

II PowerTopoLite Operating Procedures

1. Starting Special Function

MODE A SCREEN

2. Camera function

The Camera is available in each function of PowerTopoLite.

2.1 Auto snap

When using the function in PowerTopoLite while measuring the dis-
tance, the camera can be activated automatically and takes a picture
during the survey task.To use this function, the following setting must
be set to ON beforehand.
POWER TOPO LITE
MAIN MENU
ENT
ACCEPT
select on
NOTE: The part of function key assinment for the display panel
will be changed depending on power ON/OFF of the
camera. Chapter of "PowerTopoLite Operating procedures"
explains the operation in case of the camera power is OFF.
2.2 Auto snap
To active Camera:
Except for a few screens, the Camera can be activated in all screens of
PowerTopoLite.
To turn the Camera off:
MODE
F5
PAGE PREF
x2
F5 F4
F5
POWER TOPO LITE
MAIN MENU
CAMERA OFF
S. FUNC
POWER TOPO LITE
MAIN MENU
F1
select an Auto snap
CAMERA ON
20