Angle Input - Pentax R-422VN Instruction Manual

Input your desired value and press [ENT] to open
the H. ANGLE input window.
Input your desired value to view the RESULT OF
COORD. CALCULATE screen.
The Second point Coordinates are displayed by plus
or minus from the known Coordinates.
Press [ENT] to view the following screen.
The PN, X, Y, Z and PC are viewed and can be edited.
If all items are OK, press [F5] [ACCEPT] to save them.
8.1.2.3 H. angle input
In the same manner, only the value of H. angle is
input as follows, and the Second point Coordinates
are displayed.
Select 3. BE and press [ENT] to view H. ANGLE
screen.
Input H. angle and press [ENT] to view the
RESULT OF COORD. CALCULATE screen.
The Second point Coordinates are displayed by plus
or minus from the known Coordinates.
73