Remote, Offset, Station, And H. Angle Function; Remote - Pentax R-422VN Instruction Manual

Coordinates display and Angle & Distance display
1) Press [F5] [PAGE] twice to view [F3] [ANG & DIST].
2) Press [F3] [ANG & DIST] to view [F3] [COORD.] and Angle and Distance values.
3) Press [F3] [COORD.] to view [F3] [ANG&DIST] and Coordinates.
Stake Out can be selected by pressing [F4] [STAKEOUT].

4.5 Remote, Offset, Station, and H. angle function

4.5.1 Remote

Press [F5] [PAGE] to view another MEASURE
menu.
Press [F1] [REMOTE] once and then quickly press
this key again to measure your desired point
Coordinates by moving the telescope.
The displayed Coordinates automatically change according to your aiming point.
The Remote is a function of, so to speak, "Real-time offset". If a reference point or offset
point is measured, the Coordinates of your aiming point are calculated based on the reference
plane.
There are three calculation methods: Cylindrical face, Fixed plane and Rotated plane.
They are selected by "13. Preference". Refer to "13.5 Remote method selection".
The calculations are performed on the virtual planes.
To quit the Remote measurement, press [F1] [REMOTE] twice again.
26