Press [ENT] to view the following screen.
The PN, X, Y, Z and PC are viewed and can be edited.
If all items are OK, press [F5] [ACCEPT] to save them.
8.1.3 Circle Radius
P2
P3
Center P
P1
Radius
The Center point and radius of the circle drawn by three points are calculated by this
function. You can store calculated Center point.
Input:
3 points
Output: Center point of the arc
Radius of the arc
From the PowerTopoLite screen, press [F2] [CALC]
to view the CALCULATION screen.
Select 1.COGO and press [ENT] to view the COGO
screen.
74