Station Orientation; Function Of Measure Screen - Pentax R-422VN Instruction Manual

4.11 Station Orientation

Press the [F5] [ACCEPT] to view the STATION
POINT H.ANGLE SETUP screen.
Please note, that the rotation of the "H.angle"
depends on the rotation setting of
"Coordinate axis definition".
Input the H.angle by pressing [F2] [INPUT], [F3] [0SET] and [F4] [HOLD] or Reference
Point Coordinates by pressing [F5] [BSP] (Refer to "4.2 Station Orientation"). Aim at the
Reference Point, then press [ENT] to enter Multiple Orientation. For more details, refer to
"4.3 Mutiple Orientation".

4.12 Function of MEASURE screen

Press [ENT] to display MEASURE screen.
Two screens; "MEASURE" and "ANG. & DIST" are displayed and the screen to be
displayed first can be set within "PREFERENCE " of "11. MEAS. DISPLAY"
In default, "ANG.& DIST" screen is displayed.
For more details, refer to "13.11 Meas. Display"
Coordinates display and Angle & Distance display.
Aim at the Reference Point and press [ENT] to view
the MEASURE screen.
Press [F1] [MEAS] to measure the Distance and
display the Coordinates.
Press [F2] [SAVE] to save the measured data.
Press [F3] [ME/SAVE] to measure and save the measured data.
No survey data is saved when no PN is input.
Rectangular Data and Polar Data are saved with the same Point Name in the same Job File.
Press [F4] [EDIT] to edit the PN, Point Name, PH,
Prism Height and PC, Point Code.
Press [ENT] to view each input window by pressing
up or down arrow key, and input your desired Point
Name or Prism Height or Point Code. Press [F5]
[ACCEPT] if the current PN, PH and PC are acceptable.
35