Preference - Pentax R-422VN Instruction Manual

13. PREFERENCE

Followings are possible functions and the factory default settings:
A language other than English can be selected.
FUNCTION
Coordinate system can be selected.
Character input method can be selected.
Action input method can be selected.
The offset (remote) method can be selected.
Compare method can be selected.
Aiming on/off can be selected.
EDM (electronic distance meter) settings can be selected.
PRIM. MEAS KEY
SEC. MEAS KEY
EDM MIN DISP/QUICK
SHOT COUNT
SHOT INPUT
Elevation factor can be defined.
AVE. ELEV.
SCALE FACT
Duplicate point name checking
Order of displaying measurement screen
Foresight and backsight Setting of BSP
measurement
Recording format to record polar data
Press [F4] [PREF] of the PowerTopoLite screen to
view the PREFERENCE screen.
DEFAULT SETTINGS
(cfr. 13.2 Coordinate axis definition )
"10 KEY SYS.(ABC)"
"PROCESS TYPE"
"FIXED PLANE"
"ALL IN ONE VIEW"
"OFF"
"MEAS. SHOT"
"TRACK CONT"
"1mm/OFF"
"1 TIME"
"01 TIME"
+0000.0000m
1.00000000
"OFF"
"POLAR DATA"
"OFF"
"HA VA SD"
129