Station Orientation - Pentax R-422VN Instruction Manual

Input ppm value.
Press [ENT].
TEMP, PRESS and ppm input depend on the "Initial setting 1"
(ATM INPUT, ppm INPUT, NIL).

4.7 Station Orientation

Press the [F5] [ACCEPT] to view the STATION
POINT H. ANGLE SETUP screen.
Input your desired H.angle.
• [INPUT] key
Input your desired H.angle.
Please note, that the rotation of the "H.angle"
depends on the rotation setting of
"Coordinate axis definition".
• [INVERS] key
If you want to calculate direction angle, Press
[F5][INVERS] to jump to INVERSE function.
Input SP as Station Point, EP as Back Sight Point.
Result angle is set here automatically by pressing
[ENT] at RESULT OF INVERSE screen.
Press [ENT] after aiming back sight point.
Aim at the reference point, then press [ENT] to enter
multiple orientation. For more details, refer to "4.3
Multiple Orientation". After the multiple orientation
is completed, the screen moves to MEASURE
screen.
31