Typical Function Keys Of Powertopolite - Pentax R-200 Series Instruction Manual

F2 CALC Calculation
F3 VPM Virtual Plane Measurement
F4 RDM Remote Distance Measurement
Other four Functions are viewed by pressing [F5][PAGE].
Function key
F1 TRAV Stake out
F2 ROAD ROAD DESIGN
F3 I/O Input and Output
F4 PREF Preference
b. INVERSE, POINT COORDINATES, LINE-LINE INTERSECTION functions
CALCULATION screen is viewed by pressing [F2][CALC].
The CALCULATION consists of COGO, 2D SURFACE and
3D SURFACE & VOLUME and REM functions.
COGO screen is viewed by selecting 1. COGO and
pressing the [ENT].
The COGO consists of INVERSE, POINT COORDINATE,
CIRCLE RADIUS LINE-ARC INTERSECTION, LINE-LINE
INTERSECTION, ARC-ARC INTERSECTION, DISTANCE
OFFSET, POINT DISTANCE OFFSET, POINT DISTANCE
OFFSET, ARC DISTANCE OFFSET, and functions.

2.3 Typical Function keys of PowerTopoLite

Following function keys are typical ones of PowerTopoLite and each function key is described for
each function of this Manual.
Function key
ENTER
PAGE
SELECT
ACCEPT
INPUT
BSP
SAVE
ME/SAVE
EDIT
REMOTE
OFFSET
STATION
H. ANGLE
LIST
ZOOM ALL
ZOOM IN
ZOOM OUT
DISP
DELETE
FIND PN
Description
Description
Opens the input screen of Coordinate values etc.
Views another function combination.
Selects the Character and moves to next input at PN input etc.
Enters the displayed values without new Coordinates value input etc.
Inputs your desired Horizontal angle.
Views the BSP SETUP screen to input its Coordinates.
Saves inputted data.
Measures and then saves inputted data.
Changes the Point name or Prism height.
Views your aiming point Coordinates.
Views the Target Coordinates adding the offset values.
Returns to the STSATION POINT SETUP screen.
Returns to the STSATION POINT H.ANGLE SETUP screen.
Views the POINT SELECTION FROM THE LIST screen.
Returns to original size.
Magnifies the graphics size.
Reduces the graphics size.
Views point or point & graphic or point & point name or all.
Views the POINT DELETION screen.
Views the PN search screen by inputting the Point name.
10