Setting The Ip Address - Oki MB451wMFP User Manual

3
Press the to select [Network Setup],
and then press the .
4
Press the to select [Wireless
Setting], and then press the .
5
Press the to select [Set
automatically (WPS)], and then press
the .
6
Press the to select [WPS-PBC], and
then press .
OK
7
Press the to select [Yes], and then
press .
OK
Memo
● Start the WPS push button for wireless AP
after clicking [Yes] in the confirmation screen.
Alternatively, if WPS push button for wireless AP
is started first, start the WPS push button on this
equipment.
● If [No] is selected, the screen returns to that from
step 6.
8
If [Yes] is selected in step 7, [Running
pushbutton method...] is displayed in
the screen.
Note
● Panel operations cannot be performed during WPS
execution.
● When [Connection successful] is displayed, this
equipment is connected to the wireless LAN.
Memo
● If [Timeout] is displayed, it is possible that the
wireless AP of the connection destination could not
be found within the time limit. Select [Yes] again in
step 7 within 2 minutes of starting WPS push button
for wireless AP.
● If [Overlap] is displayed, WPS-push button is being
executed on 2 or more wireless AP. Please wait for a
short time and then retry.

Setting the IP address:

1
Press the <SETTING> key on the
operator panel.
2
Press the
press .
OK
- 43 -
Faxing from a Computer (For Windows)
to select [Easy Setup], and
3