Ricoh B064 SERIES Service Manual page 1383

Printer Switch 03 [SP No. 1-103-004]
No FUNCTION
Length reduction of received
data
0
0: Disabled
1: Enabled
1-3 Not used
Page separation setting when
sub scan compression is
4-7 forbidden
00-0F (0-15 mm: Hex)
Default: 6 mm
Printer Switch 04 [SP No. 1-103-005]
No FUNCTION
Maximum reducible length when length reduction is enabled with switch 03-0
above.
<Maximum reducible length> = <Paper length> + (N x 5mm)
"N" is the decimal value of the binary setting of bits 0 to 4.
Bit 4
0
0-4
0
0
1
For A5 sideways and B5 sideways paper
<Maximum reducible length> = <Paper length> + 0.75 x (N x 5mm)
Length of the duplicated image on the next page, when page separation has taken
place.
Bit 6: 0, Bit 5: 0 = 4 mm
5-6
Bit 6: 1, Bit 5: 0 = 10 mm
Bit 6: 0, Bit 5: 1 = 15 mm
Bit 6: 1, Bit 5: 1 = Not used
7 Not used.
SM
CÓPIA NÃO CONTROLADA
0: Incoming pages are printed without length
reduction.
(Page separation threshold: Printer Switch 03, bits
4 to 7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04,
bits 0 to 4)
Do not change the settings
Page separation threshold (with reduction
disabled with switch 03-0 above).
For example, if this setting is set to "10", and A4 is
the selected paper size:
If the received document is 10 mm or less longer
than A4, then the 10 mm are cut and only 1 page
prints.
If the received document is 10 mm longer than
A4, then the document is split into 2 pages.
Bit 3 Bit 2
0 0
0 0
0 1
1 1
Do not change the setting.
73
CÓPIA NÃO CONTROLADA
COMMENTS
COMMENTS
Bit 1 Bit 0
0 0
0 1
0 0
1 1
BIT SWITCHES
Setting
0 mm
5 mm
20 mm
155 mm
B819/B820