Standards Compliance; European Standards - YASKAWA L1000A Quick Start Manual

C Standards Compliance
C

Standards Compliance

◆ European Standards

Figure 90
The CE mark indicates that a product is in compliance with applicable European Directives for safety and environmental
regulations. It is required for engaging in business and commerce in Europe.
The applicable European Directives for this product are as follows. We declared the CE marking based on the harmonized
standards in the following table.
Applicable European Directive
Low Voltage Directive (2006/95/EC)
EMC Directive (2004/108/EC)
Machinery Directive (2006/42/EC)
<1> These standards are in compliance for models CIMR-LF only.
The user(s) is solely responsible for ensuring that the end products used with this drive comply with all applicable
European directives and with other national regulations (if required).
Note: 600 V class drives (models 5) are not compliant with European Standards.
■ CE Low Voltage Directive Compliance
This drive has been tested according to European standard IEC/EN 61800-5-1, and it fully complies with the Low Voltage
Directive.
To comply with the Low Voltage Directive, be sure to meet the following conditions when combining this drive with
other devices:
Area of Use
Do not use drives in areas with pollution higher than degree 2 and overvoltage category 3 in accordance with IEC/EN
664.
216
Figure 99 CE Mark
Applicable Harmonized Standards
IEC/EN 61800-5-1: 2007
EN 61800-3: 2004/A1: 2012
IEC 61800-3: 2004/A1: 2011
ISO/EN ISO 13849-1/AC: 2009
IEC/EN 62061: 2005 (SILCL3)
IEC/EN 61800-5-2: 2007 (SIL3)
YASKAWA ELECTRIC TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide
<1>
<1>
<1>