Water Temperature/Oil Level Indicator Lights Do Not Come On - Yamaha SRX700D Service Manual

Hide thumbs Also See for SRX700D:
Table of Contents

Advertisement

WATER TEMPERATURE AND/OR OIL LEVEL INDICATOR LIGHTS DO NOT COME ON.
Check the water temperature and/or
oil level indicator light bulb(s).
OK
NO CONTINUITY
Check the load control relay.
OK
FAULTY
Check for voltage on the condenser coupler.
OK
OUT OF SPECIFICATION
Check the condenser.
OK
OUT OF SPECIFICATION
Check the stator coil.
OK
FAULTY
Check the water temperature
sensor or oil level switch.
OK
FAULTY
Correct the connection and/or
replace the rectifier/regulator and/
or CDI unit.
SIGNAL SYSTEM
Replace the bulb(s).
Replace the load control relay.
Correct connection and/or replace the rectifier/
regulator.
Replace the condenser.
Replace the AC magneto.
Replace the water temperature sensor or oil level
switch.
NOTE:
The indicator lights come on for a few seconds
after the engine starts. If the lights do not come
on, check the indicator light circuit and bulb(s).
8-15
+
ELEC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srx700sd

Table of Contents