2
a
1
a
INSTALLATION
1. Install:
•
Bushings 1
NOTE:
Mount the bushing with clearance a to the end of
the relay arm 2.
a Approx. 1 mm (0.04 in)
SDN3080
2. Install:
•
Tie rods 1
NOTE:
•
Make sure that the indentation a on the tie rod
faces out.
•
The threads on both rod ends must be the same
length.
SDN3090
CAUTION:
Always use new cotter pins.
Locknut (rod end):
Nut (tie-rod-relay arm):
Nut (tie-rod-steering arm):
SDN3100
3. Install:
•
Relay rod 1
NOTE:
Make sure that the end of the relay rod with the
indentation a is connected to the relay arm.
CAUTION:
Always use new cotter pins.
SDN3110
Nut (relay rod):
3-4
CHAS
STEERING
25 Nm (2.5 m • kg, 18 ft • lb)
LOCTITE
®
35 Nm (3.5 m • kg, 25 ft • lb)
42 Nm (4.2 m • kg, 30 ft • lb)
35 Nm (3.5 m • kg, 25 ft • lb)