Yamaha SRX700D Service Manual page 354

2
3
1
4
CARBURETORS
2.Adjust:
•
TPS position
Adjustment steps:
•
Disconnect the TPS coupler.
•
Connect the test coupler to the TPS.
•
Connect three dry cells (1.5 V × 3 pcs.) in series
to the test coupler.
Dry cells (–) → 1
Dry cells (+) → 2
•
Connect the digital multimeter to the test cou-
pler.
Digital multimeter (–) lead → 1
Digital multimeter (+) lead → 2
•
Measure the voltage A.
SDN7170
NOTE:
When measuring the voltage A be sure that the
test coupler is connected to the TPS.
•
Calculate th voltage B.
Voltage B = Voltage A × (0.136)
•
Loosen the TPS bolts 4.
SDN7180
•
Connect the digital multimeter to the test cou-
pler.
Digital multimeter (–) lead → 1
Digital multimeter (+) lead → 3
•
Adjust the TPS position to obtain the specified
voltage B.
•
Tighten the TPS bolts 4.
•
Disconnect the test coupler and connect the
TPS coupler.
7-10
CARB