Inch Entry; Auto Paper Selection/Auto Drawer Switching - Canon IMAGERUNNER 5075 Reference Manual

Inch Entry

Specifying this setting ensures that the key for entering values in inches is
displayed on the various numeric entry screens.
NOTE
Even if Inch Entry is set to 'On', you still have the option to enter measurements in
millimeters by pressing [mm] on the various numeric entry screens.
1
Press
Entry].
2
Select [On] or [Off] ➞ press [OK].

Auto Paper Selection/Auto Drawer Switching

You can set which paper sources can be used for Automatic Paper Selection and
Auto Drawer Switching. This setting can be made independently for all functions of
the machine, and is especially useful when you want to use different paper sources
for different purposes.
NOTE
Paper sources set to 'On' are used for the following functions:
- APS (Auto Paper Selection): The machine automatically selects the appropriate paper
size (paper source) based on the original's size and copy ratio settings (when making a
copy), or the set ratio of the image (when receiving a fax).
- ADS (Auto Drawer Switching): If a paper source runs out of paper during a continuous
print job, the machine automatically selects another paper source with the same paper
size, and begins feeding paper from that paper source.
1
Press
[Drawer Eligibility For APS/ADS].
(Additional Functions) ➞ [Common Settings] ➞ [Inch
(Additional Functions) ➞ [Common Settings] ➞
Specifying Common Settings
4
4-31