Functions That Conserve Power - Canon IMAGERUNNER 5075 Reference Manual

NOTE
•
Settings made from the Additional Functions screen are not changed even if you press
(Reset).
•
For instructions on customizing settings, see Chapter 4, "Customizing Settings."
•
For instructions on specifying System Settings, see Chapter 6, "System Manager
Settings."
•
For instructions on specifying Printer Settings, see the PS/PCL/UFR II Printer Guide.
•
For instructions on specifying Network Settings, see the Network Guide.
•
[Communications Settings] and [Address Book Settings] are displayed on the Additional
Functions screen only if the optional Universal Send Kit is activated, or the optional
Super G3 FAX Board is installed.
•
[Communications Settings], [Forwarding Settings], [Restrict Access to Destinations], and
[Register LDAP Server] are displayed on the System Settings screen only if the optional
Universal Send Kit is activated, or the optional Super G3 FAX Board is installed.

Functions That Conserve Power

You can conserve power efficiently when the machine is not being used by using
the following modes.
IMPORTANT
Even if the main power switch is turned OFF, a small amount of energy is consumed if the
power plug is left inserted into the power outlet. If you do not want any energy consumed,
remove the power plug from the power outlet.
NOTE
•
The touch panel display turns OFF when the machine enters one of the energy saving
modes.
•
The machine can continue to receive I-fax or fax documents, and process or print data
sent from computers even if it is in one of the energy saving modes described below.
■ Energy Saver Mode
The Energy Saver mode conserves energy by lowering the temperature of the fixing unit
when the machine is not used for a prolonged period of time. You can set the machine to
enter the Energy Saver mode by pressing
reactivate the machine, press
panel power switch to reactivate the machine.
NOTE
The Energy Saver mode's energy conservation level can be set to '-10%', '-25%', '-50%',
or 'None'. (See "Energy Saver Mode," on p. 4-36.)
(Energy Saver) on the control panel. To
(Energy Saver) again. You can also press the control
Overview of the imageRUNNER 5075/5065/5055/5050
2
2-11