Canon IMAGERUNNER 5075 Reference Manual page 312

4
7
7-6
Paper Drawers
Load the paper stack into the paper drawer.
Even out the edges of the paper stack. Load the paper stack against the right
wall of the paper drawer.
When loading paper into Paper Drawer 3 or 4 for the first time, change the size
plate to match the paper size being loaded. (See "Adjusting a Paper Drawer to
Hold a Different Paper Size," on p. 7-8.)
When loading paper into the paper drawer, make sure that the paper size setting
is the same size as the paper being loaded.
IMPORTANT
•
Paper which has been rolled or curled must be straightened out prior to use.
•
Make sure that the height of the paper stack does not exceed the loading limit mark
( ) at the back of the paper drawer.