Meap Settings; Use Http Server - Canon IMAGERUNNER 5075 Reference Manual

MEAP Settings

You can print information about installed MEAP applications.

Use HTTP Server

Set Use HTTP to 'On' to access this machine from a Web browser, and utilize the
installed MEAP applications.
IMPORTANT
•
To access [User Management/Settings] from the SDL, set USE HTTP to 'On'.
•
To manage user information for the Local Device Authentication system of SSO, set USE
HTTP to 'On'.
•
To change the SSO user authentication system to Domain Authentication, Domain
Authentication + Local Device Authentication, or Local Device Authentication, set USE
HTTP to 'On'.
•
To use the Remote UI, set USE HTTP to 'On'.
NOTE
•
Set Use HTTP to 'On' if HTTP is required for MEAP functions and MEAP applications. To
use HTTP for functions other than MEAP (e.g., the Remote UI), set Use HTTP in
Network Settings (from the Additional Functions screen) to 'On'. (See Chapter 3, "Using
a TCP/IP Network," in the Network Guide.)
•
If you set Use HTTP in System Settings (from the Additional Functions screen) to 'On',
the port number for MEAP functions and MEAP applications is automatically set to
'8000'.
1
Press
Settings] ➞ [Use HTTP].
2
Select [On] or [Off].
Details of each item are shown below.
[On]: An HTTP server is used.
[Off]: An HTTP server is not used.
(Additional Functions) ➞ [System Settings] ➞ [MEAP
6-33

MEAP Settings

6