Canon IMAGERUNNER 5075 Reference Manual page 122

■ Saddle Stitch Mode
The Saddle Stitch mode enables you to make booklets, consisting of pages folded and
stapled in the center.
3
IMPORTANT
•
The Saddle Stitch mode is available only if the Saddle Finisher-AD2 is attached.
•
The maximum number of sheets, including cover sheets, that can be saddle stitched is:
- 15 sheets (17 to 20 lb bond (64 to 80 g/m
- 10 sheets (20 to 24 lb bond (81 to 90 g/m
•
The paper sizes that can be saddle stitched are: 11" x 17", LGL, or LTRR.
•
The accuracy of folds created in the Saddle Stitch mode may vary depending on the
paper type and the number of sheets.
•
Make sure to adjust the Booklet Tray guide to match the size of the output paper before
outputting saddle stitched prints, as shown below.
•
A paper jam may occur if the Booklet Tray guide is not adjusted to match the size of the
output paper.
3-20
Finisher-AD1/Saddle Finisher-AD2/Puncher Unit-AT1/Document Insertion/Folding
Unit-F1/Document Insertion Unit-E1
Originals
1
2
3
4
5
6
7
8
11" x 17" or LGL
Copy
8 1
6 3
The pages are folded
and stapled in the center to
form a booklet.
2
))
2
))
LTRR