Cleaning The Original Scanning Area; For The Imagerunner 5075/5065/5055 - Canon IMAGERUNNER 5075 Reference Manual

Cleaning the Original Scanning Area

If originals are scanned using the feeder, there may be some cases in which the
original cannot be scanned properly, or streaks appear on the output. In this case,
clean the original scanning area of the feeder by following the directions displayed
in Original Scanning Area Cleaning Method in Adjustment/Cleaning (from the
Additional Functions screen).

For the imageRUNNER 5075/5065/5055

1
7
2
7-60
Routine Cleaning
Lift the feeder.
Clean the original scanning area (thin glass strip) with a well
wrung-out damp cloth. Then, wipe the area with a soft, dry
cloth.