Setting The Printing Priority - Canon IMAGERUNNER 5075 Reference Manual

4

Setting the Printing Priority

You can set the machine's printing priority. A job that belongs to a function with a
higher set priority is printed after the job currently being processed is complete.
NOTE
Priority printing does not take place until the current job is complete. However, if the
current job is paused, the printing of a job that belongs to a function with a higher set
priority may start, depending on the settings.
1
2
4-40
Specifying Common Settings
[Receive/Fax] appears if the optional Universal Send Kit is activated, and the
optional Super G3 FAX Board is installed. If only the optional Universal Send Kit is
activated, [Receive] appears. If only the optional Super G3 FAX Board is
installed, [Fax] appears.
If you want to use an output tray for only one function, select only that function.
IMPORTANT
If a certain tray reaches its stacking limit, the machine automatically uses another
tray that is designated for the same function. However, it is recommended that you
only designate one tray for fax/I-fax documents to prevent them from getting lost.
● If you want to select the tray home position (when the optional
Finisher-AD1 or Saddle Finisher-AD2 is attached):
❑
Press the Tray Home Position drop-down list ➞ select the tray home position to
be used while jobs are being processed.
Tray Home Position
[Tray B]: Tray B moves closer to the output area.
[Tray C]: Tray C moves closer to the output area.
[Off]: The tray home position is not set. The output tray stops at the
position it is in when printing finishes.
(Additional Functions) ➞ [Common Settings] ➞
Press
[Printing Priority].
Select the printing priority for the various functions ➞
press [OK].
If you select [1] for a function, that function is given the highest printing priority.
Prints from Remote Copy jobs are included in [Copy].
[Printer] appears only if the optional UFR II/PCL/PS Printer Kit or imagePASS is
available for use.