Inch Entry - Canon imageRUNNER 3530 Reference Manual

2
Select [On] or [Off] for the desired tones ➞ press [OK].
The selected mode is set.
3
Press [Done] repeatedly until the Basic Features screen
appears.

Inch Entry

Specifying this setting ensures that the key for entering values in inches is
displayed on the various numeric entry screens.
The default entry mode for numeric values is inches, but you can change it to
millimeters by turning the Inch Entry mode 'Off'.
NOTE
•
Even if Inch Entry is set to 'On', you still have the option to enter measurements in
millimeters by pressing [mm] on the various numeric entry screens.
•
The default setting is 'On'.
Specifying Common Settings
4
4-23