Adjusting Creep (Displacement) Correction; Fold Placement Adjustment - Canon IMAGERUNNER 5075 Reference Manual

Adjusting Creep (Displacement) Correction

This mode enables you to adjust the displacement of pages that occurs between
the outermost and center page when the Booklet mode is set.
1
Press
[Creep (Displacement) Correction Adjustment].
2
Select the desired paper type ➞ press [Adjust].
3
Press [▼] or [▲] to adjust the correction width ➞ press [OK].
NOTE
To enter values in millimeters, press [mm].

Fold Placement Adjustment

You can adjust the folding positions of the paper when the C-Fold or Z-fold mode is
set.
NOTE
[Fold Placement Adjustment] is displayed only if the optional Document Insertion/Folding
Unit-F1 is attached to the optional Finisher-AD1 or Saddle Finisher-AD2.
1
Press

[Fold Placement Adjustment].

2
Press [C-Fold Placement Adjustment] or [Z-Fold Placement
Adjustment].
3
Press [▼] or [▲] to adjust the folding positions ➞ press [OK].
If you selected [C-Fold Placement Adjustment], adjust the two folding positions
(A and B).
(Additional Functions) ➞ [Adjustment/Cleaning] ➞
(Additional Functions) ➞ [Adjustment/Cleaning] ➞
Adjusting the Machine
4
4-61