Identifying The Type Of Paper In A Paper Source - Canon IMAGERUNNER 5075 Reference Manual

NOTE
•
Regardless of the stack bypass setting, you cannot select 'Off' for all of the paper
sources at the same time. At least one of the paper sources, besides the stack
bypass must be set to 'On'.
•
The settings under [Copy] include an option called [Consider Paper Type], which
determines whether the machine considers the paper type loaded in a paper
source.
- If [Consider Paper Type] is set to 'On', paper is not fed from another paper source
when the original paper source runs out of paper, unless another paper source is
loaded with the same paper size and type. For more information on stored paper
types, see "Identifying the Type of Paper in a Paper Source," on p. 4-33.
- If [Consider Paper Type] is set to 'Off', paper is fed from another paper source
when paper in the current paper source runs out, as long as the same paper size/
type is loaded in that paper source.
•
If you selected [Printer] in step 2, the Stack Bypass icon ( ) will not be displayed
on the paper selection screen.

Identifying the Type of Paper in a Paper Source

This setting enables you to specify the paper type loaded in each paper source.
IMPORTANT
Be sure to correctly set the paper type. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the fixing unit may become dirty and
require a service repair, or the paper could jam.
1
Press
[Register Paper Type].
(Additional Functions) ➞ [Common Settings] ➞
Specifying Common Settings
4
4-33