Erasing An Image Form; User-Defined Text For Page Numbers And Watermarks; Registering User-Defined Text - Canon IMAGERUNNER 5075 Reference Manual

Erasing an Image Form

1
2
4
3

User-Defined Text for Page Numbers and Watermarks

You can register specific text to be placed on your documents using the Pg/Copy
Set Numbering, Print Watermark/Date, or [Watermark] for the Secure Watermark
mode. For instructions on using the Pg/Copy Set Numbering, Print Watermark/
Date, and Secure Watermark modes, see Chapter 4, "Special Copying and Mail
Box Features," in the Copying and Mail Box Guide.
NOTE
The maximum number of user-defined text strings for watermarks and page numbers
that can be registered is 30.

Registering User-Defined Text

1
2
3
4-44
Specifying Common Settings
(Additional Functions) ➞ [Common Settings] ➞
Press
[Register Form for Form Composition].
Select the image form that you want to erase ➞ press [Erase].
NOTE
To check the image of the stored form, press [Check Print] ➞ select the paper size
➞ press [Start Print]. (See Chapter 4, "Special Copying and Mail Box Features," in
the Copying and Mail Box Guide.)
Press [Yes].
(Additional Functions) ➞ [Common Settings] ➞
Press
[Register Characters for Page No./Watermark].
Press [Register] ➞ enter the desired characters ➞ press [OK].
NOTE
For instructions on entering characters, see "Entering Characters from the Touch
Panel Display," on p. 2-24.
Press [Done].