Fresenius Medical Care 2008k Technical Manual page 38

Section V – Module Description
The heparin pump provides a means of injecting heparin into the blood circuit gradually over the
course of the treatment or as a bolus. The pump works in conjunction with the Heparin screen where
the following parameters can be set:
The module consists of a syringe holder and a carriage to push the syringe plunger at a metered rate.
The module is attached to the machine cabinet with two screws. The electrical connection to the
card cage can be removed once the rear panel has been removed.
Note: Refer to the "Specifications" section for the heparin pump specifications.
V-4
HEPARIN PUMP PLUG-IN MODULE
- size and type of syringe
- infusion rate
- infusion time
- bolus amount
2008K Technician's Manual