Fresenius Medical Care 2008k Technical Manual page 121

ENTER CONC SCREEN:
From the Service Mode screen, press the Options screen button then the Enter Conc
button.
Line FF: CONCENTRATE TYPE: Determine the concentrate type and numbers
from the acid containers at the unit (Fresenius, Cobe, Drake "salt spiked", or
Acetate).
SELECT CONCENTRATE TYPE
To select the type of concentrate press the Change Type button on the
Enter Conc screen. A selection menu will appear. Use the [
keys to select the concentrate type dictated by the facility management then
press the [CONFIRM] key. Record the concentrate type on the Installation
Checklist.
ADDING CONCENTRATE FROM CATALOG
A list of concentrates must be constructed so they are available to the user
on the Dialysate screen. By pressing the Add From Catalog button on the
Enter Conc screen, a catalog list of concentrates appears in a selection
menu. Use the [
then press the [CONFIRM] key. The screen returns to the Enter Conc
screen and now shows a user list with the selected concentrate. If additional
concentrates are to be used, press the Add From Catalog button again and
select another concentrate. When the [CONFIRM] key is pressed the screen
will update the user list with the additional concentrate. Repeat this
operation until all concentrates (maximum 10) used by the unit have been
entered. If a concentrate is not in the catalog list, refer to the next section.
ADDING A CONCENTRATE NOT ON CATALOG LIST
If a concentrate is not on the catalog list, it can be added to the user list by
press the Add New button on the Enter Conc screen. Once the Add New
button is pressed, a concentrate component screen will appear. On this
screen the naming of the concentrate and concentrate components can be
entered.
A unique name must be given to the new concentrate so that it can be
identified in the user list. To name the new concentrate, press the Conc
Name button. A keyboard will appear on the screen. Use the screen
keyboard and the number keys on the front panel to create a unique name
(up to 7 characters) for the concentrate being added. Once the name has
been typed in, press the [CONFIRM] key to return to the concentrate
component screen. Verify the new concentrate name appears next to the
Conc Name button.
If the new concentrate is a Granuflo type, press the Granuflo button to
toggle X from No to Yes then press the [CONFIRM] key. The X will
change from gray to blue.
= >
] and [ ] keys to select a concentrate from the catalog list
P/N 507300 Rev. A
Page
8 of 17
= >
] and [ ]