Recalling A Copy Job - Canon IR3250 User Manual

5
Enter the new name and press the [OK] key.
The name appears on the memory key.
NOTE
• If you press the [OK] key without any characters
entered, the name of the memory key will revert
to its factory setting, e.g. [M1] or [M2].
• The name can have up to 10 characters.
6
Press the [OK] key.
The display returns to the Special Features screen.
7
Press the [Done] key.
The display returns to the Copy Basic Features screen.

Recalling a Copy Job

1
Press the [Special Features] key.
Storing Often Used Copy Settings in Memory (Mode Memory) 3-47