Canon IR3250 User Manual page 325

Error Code
#816
#817, #823
#824
#825
#995
8-10 Error Messages Table
Cause
- Impression limit won't print. The
maximum impression limit value set
in the Department ID was
exceeded.
- Unable to connect to remote
printer.
- Unable to connect to remote
printer.
- The department ID and password
for the job are not registered on the
remote printer side.
- Scheduled job was cleared.
Solution
- Contact your network administrator.
- Check network settings.
- Try again. If the error still occurs,
contact your service representative.
- Register the department ID and
password on the remote printer.
- Send the job to a remote printer on
which the department ID and pass-
word for the job have already been
registered.
- If necessary, repeat entire proce-
dure.