Removing The Oil Filter - KTM 690 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Removing the oil filter

x
8.86
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
–
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
–
Remove the front fuel tank. (
–
Place a suitable container under the engine.
–
Remove screws
600083-10
–
Pull the oil filter
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean parts and sealing area.
600084-10
–
Disconnect the plug
–
Remove the oil filter cover
600086-11
–
Pull the oil filter
–
Completely drain the engine oil.
–
Thoroughly clean parts and sealing area.
600089-11
P. 55)
. Take off the oil filter cover with the O-ring.

out of the engine housing.

. Remove screws .
 
with the O-ring.

out of the engine housing.

68