Removing The Air Filter; Installing The Air Filter - KTM 690 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Removing the air filter

x
8.78
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
–
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.

Installing the air filter

x
8.79
–
Check the coolant level in the compensating tank
The compensating tank must be half full.
» If the level of the cooling liquid does not meet specifications:
–
–
Check the coolant level in the radiator.
The radiator must be completely full.
» If the level of the cooling liquid does not meet specifications:
–
600116-10
–
Replace the compensating tank cap and the radiator cap.
–
Remove the seat (
–
Remove the nuts
–
Remove the air filter from the air filter support.
600113-10
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Mount the clean air filter
–
Put in both parts together, position them and fix them with nuts
Info
If the air filter is not correctly mounted, dust and dirt can penetrate into the
engine and can cause damage.
–
Mount the seat (
600113-10
Correct the coolant level.
Alternative 1
Coolant ( P. 96)
Alternative 2
Coolant (mixed ready to use) (
Correct the coolant level and determine the cause of the loss in coolant.
Alternative 1
Coolant ( P. 96)
Alternative 2
Coolant (mixed ready to use) (
P. 55)
. Remove the air filter

onto the air filter support.

P. 55)
.

P. 96)
P. 96)
with the air filter support.

.

64