Removing The Motor Guard - KTM 690 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Removing the motor guard

8.67
–
Detach the belt
600091-10
–
Mount and tighten screw
Specification
Screw, rear tank fixing
bracket
–
Clean and connect the quick releases of the fuel line
600092-11
–
Connect the main silencers
screw on both sides but do not tighten it yet.

–
Align the main silencer. Mount and tighten screws
Specification
Remaining screws, chassis
–
Tighten screw
Specification
600090-11
Remaining screws, chassis
–
Mount the seat (
–
Park the motorcycle on its side stand
–
Remove screws
600073-10
and carefully position the rear tank.

.

M8
with the manifolds on both sides. Mount the

M8
on both sides.

M6
P. 55)
on a horizontal surface.

.

20 Nm Loctite ® 243™
(14.75 lbf ft)
with each other.

and on both sides.
 
25 Nm
(18.44 lbf ft)
10 Nm
(7.38 lbf ft)
58