Removing The Oil Filter - KTM 690 SMC R 2017 Owner's Manual

17 SERVICE WORK ON THE ENGINE
17.4

Removing the oil filter

Warning
Danger of scalding Engine and gear oil get very hot when the motorcycle is ridden.
–
Wear suitable protective clothing and safety gloves.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
–
Place a suitable container under the engine.
–
Remove oil drain plug
–
Completely drain the engine oil.
100200-10
–
Thoroughly clean the oil drain plug with magnet.
–
Mount the oil drain plug with the magnet and seal ring and tighten it.
Guideline
Oil drain plug with magnet
100201-01

with the magnet and seal ring.
M12x1.5
151
20 Nm
(14.8 lbf ft)