Cleaning The Oil Screen - KTM 690 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Cleaning the oil screen

x
8.87
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
–
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
–
Place a suitable container under the engine.
–
Remove plug
600077-10
–
Remove plug
–
Completely drain the remaining engine oil.
–
Thoroughly clean parts and sealing areas.
–
Check parts for damage and wear. Replace damaged or worn parts.
600079-10
–
Fit and tighten plug
Specification
Plug, oil screen
Info
Plugs
600079-11
–
Fit and tighten plug
Specification
Plug, oil screen
600077-10
with oil screen and O-ring.
 
with oil screen and O-ring.
 
with oil screen and O-ring.
 
and and oil screens
  
with oil screen and O-ring.
 
M20x1.5 15 Nm
(11.06 lbf ft)
and are identical.

M20x1.5 15 Nm
(11.06 lbf ft)
69