Display Mode Speed / Clk (Time); Display Mode Speed/Lap (Lap Time); Display Mode Speed/Odo (Odometer); Display Mode Speed/Tr1 (Trip Master 1) - KTM 690 Owner's Manual

OPERATING ELEMENTS

Display mode SPEED / CLK (time)

4.19

Display mode SPEED/LAP (lap time)

4.20

Display mode SPEED/ODO (odometer)

4.21

Display mode SPEED/TR1 (trip master 1)

4.22
–
Press the button
the display.
The time is displayed in CLK display mode.
Press the button "+". no function
Press the button "‑". no function
Press the button
for 3 - 5 seconds.
Press the button
briefly.
400319-01
–
Press the button
the display.
In the LAP display mode, up to 10 lap times can be timed with the stop watch.
Info
If the lap time continues after you press the button "‑", 9 memory locations are
already occupied.
Lap 10 must be timed with the button "+".
400320-01
Press the button "+". Starts or stops the clock.
Press the button "‑". Stops the current lap time and saves it, and the stop watch
Press the button
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
the display.
In ODO display mode, the total number of kilometers ridden is displayed.
Press the button "+". No function
Press the button "‑". No function
Press the button
for 3 - 5 seconds.
Press the button
briefly.
400317-01
–
Press the button
display.
TR1 (trip master 1) runs constantly and counts up to 999.9.
It can be used to measure the distance covered during trips or between two refueling
stops.
TR1 is coupled with A1 (average speed 1) and S1 (stop watch 1).
Info
If 999.9 is exceeded, the values of TR1, A1 and S1 are automaticallt reset to
400323-01
0.0.
Press the button "+". No function
Press the button "‑". No function
Press the button
for 3 - 5 seconds.
Press the button
briefly.
briefly and repeatedly until CLK appears at the bottom right of
The display changes to the Setup menu of the clock.
next display mode
briefly and repeatedly until LAP appears at the bottom right of
starts the next lap.
The stop watch and the lap time are reset.
Next display mode
briefly and repeatedly until ODO appears at the bottom right of
–
Next display mode
briefly and repeatedly until TR1 appears at the top right of the
Displays of TR1, A1 and S1 are reset to 0,0.
Next display mode
14