Table of Contents
Advertisement
Probe lead connector
Probing
General Purpose Probing System Description
Probe Leads
The probe leads consists of a 12-inch twisted pair cable, a ground tap, and
one grabber. The probe lead, which connects to the target system, has an
integrated RC network with an input impedance of 100 kQ in parallel with
approximately 8 pF, and all in series with 250
n.
The probe lead has a two-pin connector on one end that snaps into the probe
housing.
Probe Lead
Grabbers
The grabbers have a small hook that fits around the IC pins and component
leads. The grabbers have been designed to fit on adjacent IC pins on either
through hole or surface mount components with lead spacing greater than or
equal to 0.050 in.
2-9
I
Advertisement
Table of Contents
