HP 16550A User Reference page 25

Probing
I
Preprocessor
Target Recommended
Old Pods to New Pods Old Pods to New Pods
Number Microprocessor Configuration in a One Card Module in a Two Card Module
File to Transfer
E2406A 68030 165108 1,2,3,4,5 to 1,2,4,5,3
N/A
E2415A MCS-51 165108 No Change Required N/A
E2418A 320C20/25 165108 No Change Required
N/A
103418 1553 165108 No Change Required
N/A
E2432A 80960CA 165118 1,2,3,4,5,6 to 1,2,5,3,4,6 1,2,3,4,5,6, 7 to
Ml ,M2,M5,M3,M4,M6,E1
E2431A
320C30/31
Factory
N/A N/A
103428 RS232/HPl8 Factory N/A N/A
10342G HPl8 Factory
N/A N/A
103008 Z80 165108
No Change Required N/A
E24138 68331/2 File E68332_6 1,2,3,4,5,6 to 3,5, 1,2,4,6
N/A
E2412A 1860XP 16540A,D N/A 1,2,3,4,5,6,7 ,8,9 to
M 1,M2,M3,M4,M5,M6,E2,
E3,E1
E24148 68302 16540A,D 1,2,3,4,5,6 to 3,5, 1,2,4,6
N/A
E2435A 1860XR 165118 or N/A 1,2,3,4,5,6,7 to
16540A,D M3,M 1,M2,M4,M5,M6,E1
E2416A MCS96
165108 No Change Required N/A
Recommended Configuration File to Transfer: The recommended configuration file will work the best. If Factory is
recommended, you should use files specifically made for the HP 16550A.
Old Pods to New Pods in a One Card Module: Pods are reordered respectively.
Old Pods to New Pods in a Two Card Module: Pods are reordered respectively. Master= M and is located in lower
slot, Expander= E and is located in upper slot.
2-6