Installing and Removing Cards
Installing Cards in the HP 16500B/16501A
CA UT I 0 N
The effects of ELECTROSTATIC DISCHARGE can damage electronic
I
components. Grounded wriststraps and mats should be used when you
_ _ _ _ _ _ _ _ perform any kind of service to the mainframe or the cards
in
it.
1
Starting from the top of the card cage, loosen the thumb screws on
the filler panel(s) and pull them out of the frame.
Since the endplates of the cards overlap, you must start with the top slot of
the frame you want to change and work down when removing cards. To
install cards, start with the first open slot at the bottom of the card cage in
the frame
in
which you are changing the cards and work up.
Endplate Overhang
13-4
NEXT
HIGHEST
BOTTOM
CARD
16530E15