HP 16550A User Reference page 119

I
X and 0 entering and
leaving fields
The Listing Menu
Specify Patterns Field
X and 0 entering/ leaving Fields {Timing only)
If
the analyzer is configured as Timing, the X and 0 pattern markers are
placed at either the beginning of the pattern occurrence (entering) or at the
end of the pattern occurrence (leaving). When the entering/leaving field of
either X or 0 markers is selected, it toggles between the two choices.
Whichever choice you toggle the field to, the pattern you place
in
the pattern
display field will apply to that choice.
X marker and 0 marker Fields (State only)
If the analyzer is configured as State, X marker and 0 marker fields replace
the X and 0 entering/leaving fields. The pattern you place in the pattern
display field will apply to the marker labeled at the left.
I' - ' .~J
Label> -
I(
l
Base>
~
( X entering)( 9E )
' ( 0
entering)~
Stop measurement ( Off
( Clear
J
Pat tern
1746 9D 4 ns
~
9E 4 ns
1745 9E 4 ns
1749 9E 4 ns
1750 9E 4 ns
1751 9E 4 ns
1752 9E 4 ns
1753 9E 4 ns
1754 9E 4 ns
1755 9E 4 ns
X and 0 entering/ leaving Fields
6-10