Canceling A Program In Automatic Mode; Using Programming/Edit Mode; Creating A New Program - Duerkopp Adler 669 Premium Operating Instruction

Programming
Operating Instructions 669 PREMIUM - 00.0 - 11/2016
5.5.2

Canceling a program in automatic mode

To cancel a program in automatic mode:
1. Push the pedal fully back.
 The program is canceled and the thread cut. The machine
takes note of where the program was canceled, and then
continues from the same point when sewing resumes.
2. To cancel the program completely, press the pedal all the way
backwards again.
 The program is canceled, and the machine starts from the
first seam section in the program when sewing resumes.
5.6

Using Programming/Edit mode

5.6.1

Creating a new program

To create a new program:
1. Press the
 The softkey menu appears.
2. Press the
 The control displays the next free program number.
Fig. 36: Creating a new program
3. Press the OK button to load the program number.
Or:
Choose a different program number using ▲/▼ or enter one
4.
with the numeric buttons 0 – 9 and then press the OK button
button.
button.
81