Programming
Parameters for selected program:
Symbol
Description
Prog. Name
A program name can be entered using the numeric
buttons:
• Use ◄/► to navigate forwards and backwards
• Use the F button to delete a letter
• Use the OK button to confirm the entry
• Use the ESC button to discard the entry
Add Values(+)
• St.Len.(+)
• F.Stroke(+)
• Thr.Tens.(+)
• Gap (+)
nd
2
value of the parameters
Next Prog.
A subsequent program can be defined.
Thread Clamp
Function active or inactive, if available.
Bobbin
Setting identical to Manual mode, p. 62.
Info
Setting identical to Manual mode, p. 65.
DailyPieces
Daily piece counter, can be set to count either up or
down.
When the daily piece counter is activated, it must be
reset once after entering a value using the function
in the softkey menu to ensure it counts correctly.
88
Operating Instructions 669 PREMIUM - 00.0 - 11/2016