Duerkopp Adler 669 Premium Operating Instruction page 88

86
Symbol Description
Max. speed
Maximum speed for the seam section.
Seg.End Modes
Set what happens at the end of a seam section when
switching to the next section:
• Stop
Sewing stops – if OFF: no more settings possible,
smooth switch between the seams sections
if ON:
• Thread Trim – Thread cutting
• Needle Up – Needle position
• Foot Lifted – Sewing foot lift
• FL height – Sewing foot lift stroke height
Start Tack
Start bartack, setting identical to Manual mode,  p. 57.
End Tack
End bartack, setting identical to Manual mode,  p. 60.
Needle Up
Position of the needle when sewing stops on the seam
section.
Foot lifted
Position of the sewing foot when sewing stops on the
seam section.
FL height
Lifting height of the sewing foot when sewing stops on the
seam section.
Backwards
Backward stitches; when the parameter is activated, the
section is sewn backwards.
Center Guide
Seam middle guide (only on 2-needle machines)
Operating Instructions 669 PREMIUM - 00.0 - 11/2016
Programming