Duerkopp Adler 669 Premium Operating Instruction page 56

54
Symbol Meaning
Bobbin mode
BEFORE
the seam
Perform half stitches
Half stitches are performed when the button is pressed
(needle position raised or lowered).
IN the seam
Resetting the bobbin stitch counter
The defined maximum s.p.m. of the bobbin used is reset
to the starting value.
Thread clamp
Function active or inactive.
nd
2 edge stop distance
Moves the position for the 2
Edge stop reference run
If the edge stop has lost its correct position due to an
interruption, the reference run returns it to its starting
position.
Possible button assignment for the softkey button
(Automatic mode)
Symbol Meaning
Threading mode
The needle bar moves to the defined position.
The pedal is temporarily locked.
Reset daily piece counter.
Automatic stitch counting
Function active or inactive.
Operating Instructions 669 PREMIUM - 00.0 - 11/2016
Programming
nd
edge stop distance.