Duerkopp Adler 669 Premium Operating Instruction page 85

Programming
Operating Instructions 669 PREMIUM - 00.0 - 11/2016
4. Set the basic parameters that are explained in the table.
Symbol Meaning
Stitch length for the current seam section
Value range: 00.0 – 9.0 [mm]
• Use ◄/► to select the Stitch length parameter
• Use ▲/▼ to change the stitch length
Needle thread tension value (%) of current seam section
Value range: 00 - 99
• Use ◄/► to select the Needle thread tension parameter
• Use ▲/▼ to change the needle thread tension.
Sewing foot pressure
Value range: 01 - 20
• Use ◄/► to select the Sewing foot pressure parameter.
• Use ▲/▼ to change the sewing foot pressure
Stroke height
Value range: 00.0 – 09.0 [mm] (0.5 mm increments)
• Use ◄/► to select the Stroke height parameter
• Use ▲/▼ to change the stroke height
Set other parameters for this seam section,  p. 85.
5.
6. To set up another seam section, use
display to switch to the next seam section.
7. Use to activate the seam section and set parameters
again as described above.
8. Repeat steps 6 and 7 to define up to 30 seam sections if
necessary.
9. Press the ESC button.
 The program is saved. The machine switches to Automatic
mode and the newly created program is selected.
▲
on the seam section
83