D-Link xStack DGS-3600 User Manual page 202

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 10- 12. Access Rule Display window (IP)
To configure the Access Rule for Ethernet, open the Access Profile Table (Figure 10-5) and click Add for an Ethernet entry.
This will open the following screen:
To configure the Access Rule for IPv6, open the Access Profile Table and click Modify for an IPv6 entry. This will open the
following screen:
Figure 10- 13. Access Rule Table (IPv6)
To remove a previously created rule, click its corresponding button. To add a new Access Rule, click the Add Rule button:
Figure 10- 14. Access Rule Configuration – IPv6
186